GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone 6S

USD 388,00USD 809,00

GEPRC CineLog 35 V2 3.5″
The CineLog 35 V2 features a Caddx Ratel 2 / Walksnail Avatar / DJI O3, main carbon plate, and injection protection frame with an increased 7075 aluminum column for structural strengthening.
SKU: 332-1 Categoría: Etiquetas: , ,


About this product

The CineLog 35 V2 features a Walksnail Avatar VTX, main carbon plate, and injection protection frame with an increased 7075 aluminum column for structural strengthening. The battery mounting uses a tie with 7075 aluminum parts fixed, and the power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame adds a memory card and USB port for easy data reading. Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, this drone has more power with an aggressive system and faster response. This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors.

Note: Action camera is not included.


  • The Walksnail Avatar camera is designed with an independent under-hanging shock absorption gimbal
  • Strengthened carbon plate, hollow design, injection protection frame, and noise reduction design
  • Propeller Guard adds memory card and USB ports for easy data reading
  • GEP F722-45A AIO V2 high-performance flight controller
  • SPEEDX2 2105.5 motors with HQ DT90 propellers
  • Carefully tuned 3.5-inch HD cinematic FPV drone
  • 7075 aluminum parts are fixed, solid and stable
  • XT60E1-M Power Cable


  • Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
  • Motor: SPEEDX2 2105.5-2150KV(6S)
  • OSD: Betaflight OSD w/AT7456E chip
  • FC system: GEP-F722-45A AIO V2
  • CineLog35 V2 HD weight: 285.8g
  • Model: Cinelog35 V2 HD Avatar
  • Camera: Avatar HD Camera V2
  • Propeller: HQProp D-T90MM
  • MCU: STM32F722RET6
  • Flight time: 5′00″ -8′ 30″
  • VTX: Walksnail Avatar
  • Bottom plate: 1.5mm
  • Gimbal plate: 2.0mm
  • Antenna: 5.8G&2.4G
  • Frame: GEP-CL35 V2
  • Wheelbase: 142mm
  • Gyro: ICM 42688-P
  • Top plate: 3.5mm
  • ESC: 8Bit 45A
  • GPS: None

Recommended (Not Included)

  • XT-60 Batteries: 1050mah-1300mah


  • 1x GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone w/ Walksnail Avatar – 6S – ELRS 2.4 receiver
  • 1x L-shaped screwdriver (1.5mm)
  • 1x Naked GoPro Mounting Base
  • 1x L-shaped screwdriver (2mm)
  • 1x L-shaped screwdriver (3mm)
  • 2x HQProp D-T90MM(2 pairs)
  • 2x M20*250mm battery strap
  • 1x Antenna fixed tube (pair)
  • 1x Antenna Mounting Base
  • 1x GoPro Mounting Base
  • 2x Battery Silicone Pads
  • 1x Plastic Tweezers
  • 1x Hardware Set
  • 1x M5 wrench
  • 1x Keychain

Información adicional




Analogico, Caddx Nebula Pro, DJI O3, Walksnail


No hay valoraciones aún.

Sé el primero en valorar “GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone 6S”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Select your currency
USD Dólar de los Estados Unidos (US)

Seleccionar opciones