Descripción
HIGH-PERFORMANCE 32-BIT MCU
The ESC uses F4, which has 50% more computing power than BB21
Flight controller using F7, which has 30% more computing power than F4
![High-performance 32-bit MCU](https://i0.wp.com/img.tmotor.com/products/cine-f7-v50a-se-stack/section1x940.jpg?w=820&ssl=1)
THE FC GYROSCOPE
WITH HIGH SAMPLING RATE
Special optimized program + low noise circuitry + high sampling rate gyroscope That makes the drone stable and responsive
![test chart 1](https://i0.wp.com/img.tmotor.com/products/cine-f7-v50a-se-stack/section2-1.jpg?w=820&ssl=1)
![test chart 2](https://i0.wp.com/img.tmotor.com/products/cine-f7-v50a-se-stack/section2-2.jpg?w=820&ssl=1)
The flight controller needs to upgrade firmware to version 4.4.2 or above to use the special optimization program.
QUALITY ASSURANCE
The ESC with preset parameters better matches with Velox V3 motors, there is no problem in 1,000 real flight testing. (This data is for reference only)
![Quality Assurance](https://i0.wp.com/img.tmotor.com/products/cine-f7-v50a-se-stack/section3.jpg?w=820&ssl=1)
VELOX CINE F7
FC
- MCU
- STM32F722
- Input Voltage
- 3-6S
- Gyroscope
- ICM-42688P
- OSD
- AT7456E&HD
- Barometer
- SPL06
- Mounting Holes
- 30.5*30.5/Φ4mm
- Size
- 36*36*8mm
- Weight
- 9.2g
- Firmware
- TMTR-TMOTORVELOXF7V2 (BETAFLIGHT)
V50A SE
ESC
- MCU
- AT32F421
- Input Voltage
- 3-6S
- Current
- 50A
- Peak Current(5S)
- 60A
- Size
- 41*44.4*5.8mm
- Mounting Holes
- 30.5*30.5/Φ4mm
- Weight
- 12.3g
ACCESSORIES
XT60 Cable*1 150mm double-ended SH1.0-6P silicone cable*1
DJI O3 Cable 100mm single head SH1.0-8P silicone cable*1
FC Cable 100mm SH1.0-6P to GH1.25-8P silicone cable *1
DJI HD VTX Cable 61mm double-ended SH1.0-8P silicone cable*2
FC with other ESC Cable 61mm double-ended SH1.0-8P silicone cable*1
FC with V50A SE Cable High yellow shock absorbing washer*10 Low yellow shock absorbing washer*10
Hobby stickers*1 QC PASS card*1 Capacitor*1
Valoraciones
No hay valoraciones aún.